Animatronic dinosaurs for sale, from 1 m tabletop models to 20 m outdoor centrepieces, built for theme parks, museums, shopping malls and travelling exhibitions. Every model is made to your brief: species, pose, colour, movement set, sound and control mode, with separate indoor and outdoor builds. We handle design, production, crating, shipping documents and installation guidance, and you approve a 3D drawing before any steel is cut.
An animatronic dinosaur is a life-size mechanical dinosaur model built on a welded steel frame, sculpted in high-density foam and covered with flexible silicone rubber skin. Hidden motors, servos and pneumatic cylinders drive its head, jaw, eyes, neck, tail and limbs, so it breathes, blinks, turns and roars on command.
A square-steel frame is welded to the species' proportions, and the drive system — geared motors, servo actuators and pneumatic cylinders — is mounted at every joint that moves. The skin is layered silicone rubber over a sculpted foam body, which is why the animal bends and wrinkles like real tissue instead of moving like a machine.
A programmable controller synchronises movement, sound and lighting, so the model can run a show loop, react to visitors or be triggered by staff. Because the mechanics and the skin are separate, single parts can be replaced without rebuilding the whole model.
Workshop footage of a finished YESDINO model running its full movement and sound sequence.
| Product type | Animatronic dinosaur / life-size mechanical dinosaur model |
|---|---|
| Species | Any dinosaur or prehistoric animal; custom species and pose |
| Length | 1 m – 20 m+ |
| Frame | Anti-rust treated welded square steel tube |
| Body & skin | High-density foam body + hand-textured silicone rubber skin |
| Movements | 3 – 12+ independent movements with sound and lighting |
| Control | Infrared remote · sensor · coin-operated · button-start · timed loop |
| Power | 110 V / 220 V AC, 50 / 60 Hz |
| Usage | Indoor and outdoor versions |
| Accessories | Sound system, LED lighting, display platform, safety fence, spare-parts kit |
Swipe the table sideways to see all columns.
| Model type | How it moves | Best for | Typical use |
|---|---|---|---|
| Animatronic dinosaur | Motor- and pneumatic-driven head, jaw, eyes, limbs and tail; stays in a fixed position | Immersive exhibits, indoor attractions, museum galleries, entrance features | Theme park dino zones, museums, malls, science centres |
| Static (fiberglass) dinosaur | No movement; weather-resistant rigid shell | Background scenery, large outdoor installations, set dressing | Park trails, garden landscaping, outdoor photo points |
| Walking dinosaur costume | Worn by a performer, moves freely through crowds | Parades, openings, roaming entertainment, interactive shows | Mall events, festivals, TV and live performances |
Swipe the table sideways to see all columns.
We build all three lines, so a mixed installation can be planned as one project.
Six project types we build for most often, and the typical scope of each.
Entrance showpieces, indoor Dino World zones and outdoor trail exhibits, specified for continuous daily operation.
Typical scope: animatronic centrepieces · static trail models · walking dinosaurs for event days · site layout drawings.
Anatomy-correct reconstructions at 1:1 scale, with restrained movement sets that support the exhibit narrative.
Typical scope: species-accurate sculpting · scale-matched builds · low-noise movement · indoor finish quality.
Footfall and photo-point installations for atriums and event floors — a moving dinosaur creates the queue a static display cannot.
Typical scope: atrium-scale models · sensor or button activation · rolling platforms for seasonal campaigns.
Dinosaur zones that extend the visitor route beyond the living collection, engineered for real weather.
Typical scope: outdoor-grade materials · anchoring and drainage advice · maintenance and cover guidance.
Multi-unit sets designed around transport, rebuilding on site within days so the same exhibition can tour city to city.
Typical scope: container-load planning · modular builds · numbered assembly drawings · packing list and shipping documents.
Close-up detail work for film and broadcast, and interactive models for schools and science shows.
Typical scope: high-detail head and skin work · controlled movement for camera takes · operator training.
Produced end to end in our own workshop in Zigong, Sichuan — the region known for the Dashanpu dinosaur fossil beds. No step is outsourced.
We confirm species, size, movement list and site conditions, then produce a design drawing for approval. Nothing is cut until you sign off on the shape.
An anti-rust treated square steel frame is welded to the approved proportions, with load-bearing points calculated for the joints that carry movement.
Motors, servo actuators, pneumatic cylinders and linkage are mounted and aligned at each moving joint, then run individually to check travel, torque and clearance.
High-density foam is cut to the 3D data, then hand-sculpted so muscle structure, skull shape and posture match the species.
Silicone rubber skin is applied in layers and hand-textured for folds, scales and scars — the step that makes the model look alive once it moves.
Base colour, stripes, shading and eye, teeth and claw detail are airbrushed and hand-finished to your colourway.
Movements are programmed and synchronised with sound and lighting, then the model is run continuously and checked before sign-off.
The finished model is dismantled into transport modules and packed in foam inside a reinforced frame crate, ready for loading and export.
Founded in 2015 as Zigong Dino Culture & Art Co., Ltd. — a manufacturer, not a trading company. The same workshop designs, builds, tests and ships every model.
Design, steelwork, sculpting, skinning, painting, programming and testing all happen under one roof in Zigong, Sichuan — so specifications and lead times are confirmed by the workshop, not a reseller.
Sculpting is checked against published palaeontological references for skull structure, limb proportion and skin pattern, so the model reads as that species even in close-up.
Anti-rust frames, sealed drive components and UV- and water-resistant skin are specified for outdoor use. Tell us the installation city and the materials are matched to it.
Models break down into container-friendly transport modules and ship by sea or air with complete export documentation. On-site installation and operator training are available for most destinations.
A single project contact follows your order through design, production and shipping, and stays reachable afterwards for spare parts and technical support. Your model's drawings stay on file.
You get progress photos at the frame, sculpting, skinning and painting stages, plus live video calls from the workshop — so you can watch your model being built before it ships.
Tell us four things — species (or a reference photo), size and quantity, indoor or outdoor use with the installation country, and your movement requirements — and we will send a written quotation with a free 3D design drawing, usually within one working day.
Price depends on length, number of movements, drive type (motor or pneumatic), skin and paint detail, sound, lighting and control system, so we quote per project rather than publishing a list price. Send us the species, size, quantity and site conditions and we will return a written quotation with a free 3D design drawing.
No. There is no minimum order quantity for our standard animatronic dinosaur models. A single unit is fine, and most first orders start with one or two models.
Standard models are usually completed within 2–4 weeks after the deposit and approved drawings. Fully custom species and multi-unit park projects take longer. Your exact schedule, including shipping transit time, is confirmed in writing on the order.
Yes. We build from 1 m tabletop models up to 20 m+ outdoor centrepieces, and every model can be customised in species, pose, colour, movement set, sound and control mode. Send a reference photo or sketch and we will match it in a 3D rendering before any steel is cut.
Yes, we build separate indoor and outdoor versions. Outdoor models use an anti-rust treated frame, UV-stable and water-resistant silicone skin, and sealed motors and electrical components. Tell us the installation location and we will specify the right materials and anchoring method.
Standard control is an infrared remote with preset movement sequences. Sensor activation, coin-operated or button-start operation for paid attractions, timed loops and an optional control panel are also available. Sound and lighting run from the same controller.
Animatronic models stay in place but their head, jaw, eyes, neck, tail and limbs move, making them the centrepiece of an exhibit. Static fiberglass models do not move and cost less, which suits scenery and outdoor trails. Walking dinosaur costumes are worn by a performer and move through crowds, for parades and roaming entertainment.
Large models are dismantled into transport modules, packed in foam inside reinforced frame crates, and shipped by sea or by air. We prepare the packing list, commercial invoice and export documents, and provide on-site installation and staff training for most projects — or numbered assembly drawings and video guidance if your own team installs.
Every model is fully tested before packing and ships with a spare-parts kit and a maintenance manual. Warranty terms and the exact spare-parts list are stated in your contract. After the warranty period we provide remote technical support and keep your model's drawings on file for future repairs.
We approve the 3D rendering with you before production starts, so the shape, proportion and movement layout are agreed in advance. Fine detail can vary slightly between a screen image and hand-painted silicone skin, so we also send workshop photos at the frame, sculpting and painting stages.
Yes. Once you confirm species, size and movement requirements, we provide a 3D design drawing for approval at no cost, and you can request a live video call from our workshop to see the model during production.
Yes. Our factory is in Zigong, Sichuan, China, and we welcome customer visits, including the sculpting, skinning and testing areas and a live demonstration of finished models. If travelling is not practical, we can arrange a live video walkthrough of the workshop instead.
